Connecting The Projector; Connecting A Computer - Sony VPL-CX21 Operating Instructions Manual

Connecting the
Projector
When you connect the projector,
make sure to:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose
connections may increase noise and
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out by the plug, not the cable itself.

Connecting a Computer

This section describes how to connect the
projector to a computer.
For more information, refer to the
computer's instruction manual.
To connect a computer
Left side
White Red
to audio to audio
output output
(L) (R)
A HD D-sub 15-pin cable (supplied)
B A/V connecting adaptor (supplied)
C Audio cable (not supplied) (Connect only
when you want to output the audio from the
speaker of the projector.)
Notes
• The projector accepts VGA, SVGA, XGA,
SXGA, and SXGA+ signals. However, we
recommend that you set the output mode of
your computer to XGA (VPL-CX21) or

Connecting the Projector

to monitor
output
Computer
9