Remove the cutting unit
Remove any remaining hair clippings from the
cutting unit
using the cleaning brush
1
Apply one or two drops of blade oil
tween the blades and the moving parts.
Adjust the length position indicator
5/6₄ in / 2.0 mm after cleaning the product
before reattaching the cutting unit
product.
16 US-EN
.
1
.
13
be-
14
to
4
to the
1
1
Note: Clean the cutting unit, comb attach-
ment and thinning attachment after every use.
Storage
Place the product in the charging station
store it. Or store inside the travel case
Troubleshooting
Problem
Cause
The product
The battery
does not
may not be
work.
charged.
Trimming is
Hair may
difficult.
be stuck in-
side the
blades.
Note: For optimal battery capacity the product
must be fully discharged during operation and fully
charged roughly every 6 months.
Disposal
Dispose of the packaging through your
local recycling facilities and in compli-
ance with all federal, state and local
regulations.
2
to
6
.
16
Solution
Recharge the
product.
Clean the cutting
unit
and the
1
product and oil it if
necessary.