Kolver EDU 2AE/TOP/MITO Manual page 13

INTERPRETATION OF ACOUSTIC SIGNALS
The control unit emits sounds which help you understand if the fastening operation has been carried out
correctly or incorrectly. When the torque is reached meeting all the parameters set, the control unit utters a
0.5 sec beep as confirmation. On the other hand, torque reached under min time, during the Ramp time or
under the Brake time (see error signals on the display) will cause the control unit to utter two beep sounds.
In case of wrong settings (e.g. both sequence and switchbox are enabled or the selected switch box program
is different from the one required by the sequence) the control unit will utter a long beep sound.
I/O CONNECTIONS:
Manual EDU 2AE/TOP/MITO Page 13