GB
IE
NI
Content
Introduction ............................................................6
Overview ...................................................................... 7
Technical data .......................................................... 8
Safe Operation ................................................................9
Residual Risks ................................................................11
Assembly ............................................................... 12
Operation ............................................................. 13
Transverse stop ............................................................. 14
Using the Laser ............................................................ 15
Use ........................................................................ 15
Transport ..................................................................... 16
6
Cleaning ...................................................................... 16
Storage........................................................................ 16
Guarantee ............................................................ 18
Service-Center ....................................................... 18
Importer ............................................................... 18
Introduction
Congratulations on the purchase of your new device. With it, you
.................10
have chosen a high quality product.
During production, this equipment has been checked for quality
and subjected to a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute part of this product. They
contain important information on safety, use and disposal.
Before using the product, familiarise yourself with all of the oper-
ating and safety instructions. Use the product only as described
and for the applications specified.
Keep this manual safely and in the event that the product is
passed on, hand over all documents to the third party.
Intended purpose
The table circular saw is used for cutting all types of wood lengt-
hwise and crosswise (only with the transverse stop), depending
on the machine size. All types of round timbers must not be cut
with it. The machine may be used only for its prescribed purpose.
Any other use beyond that is considered to be not in accordance
with the designated purpose. The user/operator is liable for all
types of resulting damage or injury and not the manufacturer.
The only saw blades which may be used are those which are sui-
table for the machine (HM or CV saw blades).
The use of any type of HSS saw blades and cutting discs is pro-
hibited. Use in accordance with the designated purpose is also
deemed to include observance of the safety instructions, as well
as the assembly and operating instructions in the operating ma-
nual.Individuals who operate and maintain the machine must be
familiar with it and must have been instructed in possible haza-
rds. Moreover, the latest accident prevention regulations must be
strictly observed. Other general rules in the fields of occupational
health and safety technology must be complied with.
Caution!
When using equipment, certain safety precautions must be com-
plied with in order to avoid injuries and damage. You should
therefore read these operating instructions / safety instructions
carefully. Keep these in a safe place so that the information
is available to you at all times. Should you give the device to
anyone else, please give them these operating instructions /
safety instructions as well. We assume no liability for accidents
or damage caused by failure to observe these instructions or the
safety instructions. Changes to the machine will cause the ma-
nufacturer's liability with respect to any resulting damage to be