Remote Operation; Wired Timer Controller (Fc-T) Setup; Wired Timer Controller (Fc-T) Operation - Chauvet DJ Hurricane 1800 FLEX User Manual

Remote Operation

The Hurricane 1800 Flex can be operated manually, or with the included wired timer controller (FC-T). The
Manual button is located on the rear of the unit. See the
operated with the FC-M manual wired remote or the FC-W wireless remote, available separately.
The Hurricane 1800 Flex operates according to the following priority control levels:
1. A DMX controller will take priority over both the Manual button and the FC-T.
2. The Manual button will take priority over the FC-T.
3. The FC-T has the lowest priority control level.

Wired Timer Controller (FC-T) Setup

The FC-T wired timer controller allows you to automatically trigger fog output by setting output, interval
time, and duration time. LED indicator lights display the machine and controller's current state. Rotary
knobs set interval, output, and duration times, while manual and continuous buttons allow overriding
control.
1. Plug in the fog machine to power.
2. Plug in the wired timer controller to the Remote Connector socket on the back of the fog machine.
(See the Product
3. Allow the Hurricane 1800 Flex three to four minutes to heat up before continuing.
FC-T Wired Timer Controller Overview

Wired Timer Controller (FC-T) Operation

Option Function
INTERVAL Sets amount of time between outputs of fog in Timer mode.
DURATION Sets duration of outputs of fog in Timer mode.
OUTPUT Sets volume of fog output.
TIMER ON/OFF Activates Timer mode.
CONTINUOUS Activates Continuous Output mode.
MANUAL Triggers fog output while held.
The FC-T wired timer controller has three modes of operation: timer, continuous, and manual.
Timer Mode
To trigger the Hurricane 1800 Flex with the timer function, follow the instructions below:
1. Set the desired output level with the OUTPUT knob.
2. Set the INTERVAL and DURATION knobs to the desired positions.
3. Press the <TIMER ON/OFF> latching button. The LED indicator above the button will light up. The
timer will now run as set by the INTERVAL, DURATION, and OUTPUT knobs.
4. Press the <TIMER ON/OFF> button again to turn off the timer.
The <MANUAL> button will override the timer.
Page 10 of 18
Overview)
Product Overview. Additionally, the product can be
Hurricane 1800 Flex User Manual Rev. 1
Operation