Sony Qualia 006 Owner's Manual page 138

Other Information
Problem
TV cabinet creaks
A slight creaking noise occurs
from the bottom part of the TV
The cooling fan is loud
The signal from a selected
i.LINK device is not being
displayed
The TV does not turn on
136
Possible Remedies
❏
When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.
❏
Cinema Black Pro
is turned On/Off, a natural creaking noise occurs due to the basic structure of the
optical unit. The creaking sound is an inherent nature of this system and is not a
defect.
❏
If the SXRD projection TV is used at high altitudes and
On, the cooling fan runs faster and its sound becomes louder. If the TV is not
used at high altitudes, set
❏
If you have several i.LINK devices connected and operating at once, the TV may
not be able to display the signal from the selected device. Turn the other i.LINK
devices off, and reselect the desired i.LINK device.
❏
If you are using a digital VCR, turn off any Auto LINC functionality of the VCR.
For details, see the digital VCR's user manual.
❏
The SXRD projection TV cools down its projection lamp when the power is
turned off. It takes up to two minutes for the picture to come back after the TV is
turned on again. Wait for a while until the picture comes back.
applies a mechanical iris system. When
High Altitude Off
to
Cinema Black Pro
High Altitude is set to
(see page 123).