Connecting I.link Devices - Sony Qualia 006 Owner's Manual

Using i.LINK
Connecting i.LINK
Devices
Rear of the SXRD projection TV
100
✍
Before connecting this unit to i.LINK-compatible equipment, read the
instruction manual of the i.LINK device to be connected.
To connect a digital i.LINK device (using only a digital signal)
1
Using an i.LINK cable (see page 99), connect the device's i.LINK jack
to either of the SXRD projection TV's i.LINK jacks.
To connect an i.LINK device that supports an EIA-775A connection
1
Using an i.LINK cable (see page 99), connect the device's i.LINK jack
to either of the SXRD projection TV's i.LINK jacks.
2
Using an A/V cable, connect the i.LINK device's A/V output jacks to
the SXRD projection TV's VIDEO 3 A/V input jacks.
✍
Only one i.LINK cable should connect the SXRD projection TV and any
given i.LINK device.
AUDIO-R
AUDIO-L
VIDEO
i.LINK cable
i.LINK-equipped device
Cables are often color-
coded to connectors.
Connect red to red,
white to white.
A/V cable