Sony Qualia 006 Owner's Manual page 57

Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Digital satellite receiver
When connecting to the Digital Satellite Receiver's DVI-HDTV connector
If you are connecting to a digital satellite receiver with DVI-HDTV output,
you can connect to the SXRD projection TV's HDMI IN jack by using an
HDMI-DVI cable.
1
Using an HDMI-DVI cable, connect the digital satellite receiver's DVI-
HDTV OUT jack to the SXRD projection TV's HDMI IN jack.
Use the HDMI IN 6 input.
2
Using an audio cable, connect the digital satellite receiver's AUDIO
OUT jacks to the SXRD projection TV's AUDIO IN jacks.
✍
The DVI-HDTV VIDEO jack does not provide audio, so audio cables must
be connected to provide sound when an HDMI-DVI cable is used.
✍
Use only the HDMI IN 6 input for this connection. If the HDMI IN 7 input
is used for this connection, the AUDIO IN jacks in HDMI IN 6 become
unavailable.
HDMI-DVI cable
Audio cable
Setting Up the SXRD Projection TV
Rear of SXRD projection TV
AUDIO-R
AUDIO-L
IN
55