Sony Qualia 006 Owner's Manual page 117

z
If 4:3 Default is set to
anything but Off, the
Wide Mode setting
changes only for the
current channel. When
you change channels
(or inputs), Wide Mode
is automatically
replaced with the 4:3
Default setting. To
retain the current Wide
Mode setting as
channels and inputs
are changed, set 4:3
Default to Off.
Option Description
4:3 Default Wide Zoom
Select the default
screen mode to
use for 4:3
Normal
sources.
Full
Zoom
Off
Overscan Normal
+1 or +2
Vertical Center Adjust
Vertical Size Adjust
Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Select to continue using the current screen
mode setting when the channel or input is
changed.
Select to display the picture within the normal
viewing area of the screen.
Select to reduce the size of the picture to show
the overscan (i.e. the portion of the picture
outside of the normal viewing area).
Allows you to move the position of the picture
up and down in the window. (Available only in
Wide Zoom and Zoom modes.)
Press V or v and press
correction between +10 and –10.
Allows you to adjust the vertical size of the
picture. (Available only in
Zoom modes.)
Press V or v and press
correction between +10 and –10.
Using the Menus
to choose a
Wide Zoom and
to choose a
115