Sony KP-ES48 Operating Instructions Manual page 39

3
Move up or down to
select the desired option
(see the table below),
then press .
Select
"WIDE MODE"
"ECO MODE"
"GAME MODE"
Notes
• When you turn on "ECO MODE", the picture may become dimmer.
• "WIDE MODE" is available only when you have selected DRC1250
• "WIDE MODE" and "GAME MODE" is available only when receiving
• If "ECO MODE" is on, the ECO MODE (
To return to the normal screen
Press MENU.
Tip
• For details on the menu system and how to use the menu, see
To
change the size of the picture when receiving wide-mode (16:9)
picture signal.
Move up or down to select "ON", then press
To restore the normal picture size, select "OFF" then press
reduce power consumption of your projection TV to save energy.
Move up or down to select "ON", then press
To cancel, select "OFF", then press
adjust the picture setting that is suitable to view video games.
Move up or down to select "ON", then press
To cancel, select "OFF", then press
Turning "ECO MODE" off will restore the picture to its original setting.
(NTSC mode) in the "A/V CONTROL" menu with video input or DVD
input.
signals through the t (video input),
(component video input) jacks at the front and rear of your projection
TV.
bottom right corner of the screen when you turn on the projection TV or
when you press on the remote. (See pages 13 and 14)
"Introducing the menu system" on page 30.
.
.
.
.
.
(S video input), or
) icon will appear at the
Adjusting Your Setup (MENU)
.
39