Additional Information; Troubleshooting - Sony KP-ES48 Operating Instructions Manual

Sony operating instructions projection tv kp-es61, kp-es53, kp-es48, kp-es43
Table of Contents

Advertisement

Available languages

Available languages

Additional Information

Troubleshooting

If you have any problem while viewing your TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.
Symptom
• The connection is
Snowy picture
• Channel presetting
Noisy sound
• The antenna type is
• The antenna
• Signal transmission
Distorted picture
• Broadcast signals
Noisy sound
• The TV system
Good picture
Noisy sound
• The power cord,
No picture
• The projection TV is
No sound
46
Additional Information
Possible cause
loose or the cable is
damaged.
is inappropriate or
incomplete.
inappropriate.
direction needs
adjustment.
is low.
are too strong.
setting is
inappropriate.
antenna or VCR is
not connected.
not turned on.
Solutions
• Check the antenna cable and
connection on the projection TV, VCR
and at the wall.
• Press the PRESET button to display
the "MANUAL PROGRAM" menu
and preset the channel again.
• Check the antenna type (VHF/UHF).
Contact a Sony dealer for advice.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
• Try using a booster.
• Press the PRESET button to display
the "MANUAL PROGRAM" menu.
Then, select "
SENS: LOW".
• Turn off or disconnect the booster if it
is in use.
• If the sound of all the channels are noisy,
display the "CH PRESET" menu and
select "AUTO PROGRAM" to preset the
channels again.
• If the sound of some channels is noisy,
select the channel, then display the
"CH PRESET" menu and select the
appropriate TV system ("TV SYS").
• Check the power cord, antenna and
the VCR connections.
• Press I/1 on the remote.
• Press ! on the TV to turn off the
projection TV for about five seconds,
then turn it on again.
Page
5
44
45
43
44
5
13
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents