Pro Logic - Sony KP-ES48 Operating Instructions Manual

Connecting a DVD player to t (video input)
Connect t 1, 2, or 3 (video input) /
TV to LINE OUT on your DVD player.
To audio/video
output
Audio/Video cable
(not supplied)
R-AUDIO-L
VIDEO
LINE OUT
Notes
• Since the high quality pictures on a DVD disc contain a lot of information,
• Connect your DVD player directly to your projection TV. Connecting the
Connecting an amplifier with Dolby
decoder to
Connect the speaker terminals on your amplifier to
Rear of
projection TV
C
Note
• When making connection to
* Manufactured under license from Dolby Laboratories Licensing
To t 1, 2, or 3
(video input)
(yellow)
DVD
-L (MONO)
player
(white)
-R (red)
picture noise may appear. In this case, adjust the sharpness ("SHARP")
under "PERSONAL ADJUST" in the "PICTURE MODE" menu (see
page 34).
DVD player through other video equipment will cause unwanted picture
noise.
C– (center speaker input)
to C– (center speaker
inputs)
"SPEAKER: CENTER IN" in the "A/V CONTROL" menu. (see page 33)
Corporation.
DOLBY, the double-D symbol ; and "PRO LOGIC" are trademarks of
Dolby Laboratories Licensing Corporation.
(audio/video) connectors on your projection
1 2 3
*

Pro Logic

C– on your projection TV.
Amplifier with Dolby
Pro Logic decoder
Rear
speaker
(L)
Front
speaker
(L)
C– on your projection TV set
Using Your New Projection TV
Rear of
projection TV
: Signal flow
Rear
speaker
(R)
Front
speaker
(R)
11