Sony KP-ES48 Operating Instructions Manual page 48

Troubleshooting (continued)
Symptom
• The stereo reception
Projection TV
cannot receive
stereo broadcast
signal.
• The connection is
Stereo broadcast
sound switches
on and off or
is distorted.
• The antenna direction
or
• The broadcast signal
The sound switches
between stereo and
monaural
frequently.
• The channel carries
"100?" appears at
the top of the
screen after
approximately 10
seconds and there is
no Teletext display.
• Connection is loose
Teletext display is
incomplete
(snowy picture or
double images).
• The antenna
• Signal transmission
• There is interference
Lines moving across
the TV screen.
• Some shooting
Cannot play
shooting games.
48
Additional Information
Possible cause
setting is
inappropriate.
loose or the cable
is damaged.
needs adjustment.
has a transmission
problem.
no Teletext
broadcast.
or the cable is
damaged.
direction
is inappropriate.
is too low.
from external
sources, e.g., heavy
machineries, nearby
broadcast station.
games which
involve pointing a
light beam at the
projection TV screen
with an electronic
gun or rifle cannot
be used with your
TV. For detail, see
the instruction
manual supplied
with the video game
software.
Solutions
• Press A/B until "AUTO" appears on
the screen.
• Check the antenna cable and
connection on the projection TV, VCR
and on the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Press A/B until a better sound is heard.
—
• Check the antenna cable and connection
on the projection TV, VCR, and at the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Try using a booster.
• Use the fine tuning ("FINE") function.
• Use the fine tuning ("FINE") function.
__
Page
24
5
–
24
26
5
–
–
45
45
–