Sony KP-ES48 Operating Instructions Manual page 34

Changing the "A/V CONTROL" setting (continued)
Adjusting the "ADJUST" options under "PICTURE MODE"
1
Move up or down to
select the desired item
(e.g., "COLOR"), then
press .
2
Adjust the value according to the following table, then press
For
"PICTURE"
"COLOR"
"BRIGHT"
"HUE"*
"SHARP"
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "PERSONAL".
Adjusting the "ADJUST" options under "SOUND MODE"
1
Move up or down to
select the desired item
(e.g., "BALANCE"), then
press .
2
Adjust the value according to the following table, then press
For
"BASS"
"TREBLE"
"BALANCE"
"BBE"
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select "PERSONAL".
34
Adjusting Your Setup (MENU)
Move down or left to
decrease picture contrast
decrease color intensity
darken the picture
increase red picture tones
soften the picture
* You can adjust "HUE" for the NTSC color system only.
Move
down or left to decrease the bass, up or right to increase the bass.
down or left to decrease the treble, up or right to increase the treble.
down or left to increase the left speaker's volume, up or right to increase
the right speaker's volume.
up or down to select "HIGH", "LOW", or "OFF".
"BBE" can produce clear sound.
COLOR
Move up or right to
increase picture contrast
increase color intensity
brighten the picture
increase green picture tones
sharpen the picture
BALANCE
8 0
.
00
.