Wifi 802.11 b/g/n access point with two 10-100 mb/s lan ports, input for remote wifi radio on/off push-button, 220-240 v~ 50/60 hz power supply - 2 modules (6 pages)
Page 1
Installer manual Eikon 20508 Arké 19508 Plana 14508 BUS EnOcean interface - 2 modules...
Page 2
Instructions This manual is necessary in order to configure the radio-frequency devices when used with the By-me automation system through the specific Bus interface with the EnOcean module 20508-19508-14508. WARNING: The Bus interface 20508-19508-14508 is compatible with control unit 21509 ver. 3.00 •...
Page 3
The interface manages all these functions via pairs of configurable radio buttons such as rocker switches, dimmer switches, roller shade and scene controls and radio relay actuators. It is supplied in the following versions: 20508: 2 Eikon modules 19508: 2 Arkè modules 14508: 2 Plana modules Eikon Arké...
Page 4
Bus interface with EnOcean module List of radio frequency devices that can be used VIMAR Code DESCRIPTION / COMPOSITION Flat control with two rocker buttons with EnOcean radio transmitter without batteries, power 20505 supply from the built-in electro-dynamic generator, to be completed with the dedicated but-...
Page 5
(lights, roller shades, scenes, etc.) in a similar manner to the conventional By-me control appliances. IMPORTANT: The buttons can be specially customized with any symbol. The pair of buttons can be supplied in the following versions: 20506: 2 Eikon modules 19506: 2 Arkè modules 14506: 2 Plana modules Eikon Arké...
Page 6
Mounting frame 21612-19612-14612 The distance from flush with the wall mounting frame + cover plate + control + buttons is 9.5 mm for Eikon, 10.2 mm for Arkè and 10.5 mm for Plana. Cover plate 20652.. - 20682.. - 19652.. - 19682.. - 14652..
Page 7
Mounting frame 21507 - 20507 - 19507 The distance mounting frame + cover plate + control + buttons is 13 mm for Eikon, 13.7 mm for Arkè and 14 mm for Plana. Cover plate 20652.. - 20682.. - 19652..- 19682.. - 14652..
Page 8
Pair of buttons for flat control with EnOcean module 21507-20507-19507 Cover plate 21642.. - 20642.. - 20672.. - 19642.. - 19672.. - 14642.. Functionality With the By-me control panel, each single button of the pair can be configured as an On/Off, dimmer switch, roller shade button or scene control button.
Page 9
Buttons 20506 - 19506 - 14506 can be customized with: • standard symbols and messages (for full details, please refer to the Vimar catalogues). • symbols and text on request. As regards customizing with symbols and text on request, take account of the following: - provide a printout or a film of the subject to duplicate, drawn in black and white to a scale 2 or 3 times greater than the finished size;...
Page 10
If there is no mains power supply, the actuator keeps the previous configuration. 01796.1 230V~ 50/60 Hz enocean ® VIMAR SPA VIALE VICENZA 14 36063 MAROSTICA VI ITALY TECHNICAL CHARACTERISTICS. • Power supply: 230 V~, 50-60 Hz. • Reception frequency: 868 MHz.
CONNECTIONS TO THE LOAD Neutral 01796.1 Switch connection 230V~ 50/60 Hz Connection to the load enocean ® VIMAR SPA VIALE VICENZA 14 36063 MAROSTICA VI Line ITALY µ RGB LED Touch button CONNECTION WITH A TRADITIONAL PUSH BUTTON The actuator 01796.1 can be connected to a traditional push button to control the load from a second point (in addition to...
Page 12
EnOcean multi-function 1-relay actuator (01796.1) FUNCTIONALITY ADDING RADIO ROCKER SWITCHES The configuration procedure is as follows: 1) Connect the actuator 01796.1 to the electric mains. 2) Press the touch button for 5 s; the LED will blink red, then release the button. 3) To access the actuator acquirement mode, please see the By-me control panel manual.
EnOcean multi-function 1-relay actuator (01796.1) The procedure for selecting the type of operation is as follows: 1) Press the touch button for 8 s (after the first 5 s the device goes into the phase of adding buttons and then into the phase of con- figuring button management);...
Page 14
EnOcean multi-function 1-relay actuator (01796.1) Warning: The following illustrates the situations that reduce the transmission/reception capacity of the radio devices. - Radio lighting point installed in a metal casing; - Plasterboard walls with insulation of wool and aluminium foil; - False ceilings made of metal or carbon fibre; - Lead glass or glass with covering of metal, steel jewellery;...
Need help?
Do you have a question about the Eikon and is the answer not in the manual?
Questions and answers