Bosch Climate 5000 SCI 18 CAS/ OU- OUE Owner's Manual page 4

Indoor Unit Parts and Major Functions
FOR OUTDOOR UNITS WITH AUXILIARY ELECTRIC HEATER
When the outside temperature is below 0°C, we strongly recommend
keeping the unit plugged in at all times to ensure smooth ongoing
performance.
Features
Default Setting
When the air conditioner restarts after a power failure, it will default
to the factory settings (AUTO mode, AUTO fan, 24°C). This may cause
inconsistencies on the remote control and unit panel. Use your remote
control to update the status.
Auto-Restart (Some Models)
In the case of power failure, the system will immediately stop. When
power returns, the operation light on the indoor unit will flash. To restart
the unit, press the ON/OFF button on the remote control. If the system
has an auto restart function, the unit will restart using the same settings.
Louver Angle Memory Function (Optional)
Some models are designed with a louver angle memory function. When
the unit restarts after a power failure, the angle of the horizontal louvers
will automatically return to the previous position. The angle of the
horizontal louver should not be set too small as condensation may form
and drip into the machine. To reset the louver, press the manual button,
which will reset the horizontal louver settings.
Refrigerant Leak Detection System (Some Models)
In the event of a refrigerant leak, the LCD screen will display "EC" and the
LED indicator light will flash.
Energy Saving Tips
• DO NOT set the unit to excessive temperature levels.
• While cooling, close the curtains to avoid direct sunlight.
• Doors and windows should be kept closed to keep cool or warm air
in the room.
• DO NOT place objects near the air inlet and outlet of the unit. This
will reduce the efficiency of the unit.
• Set a timer and use the built-in SLEEP/ECONOMY mode if applica-
ble.
• If you do not plan to use the unit for a long time, remove the batter-
ies from the remote control.
• Clean the air filter every two weeks. A dirty filter can reduce the
cooling or heating efficiency.
• Adjust louvers properly and avoid direct airflow.
4
Closing curtains during heating also helps keep the heat in
Fig. 2.
Doors and windows should be kept closed
Fig. 3.
Climate 5000 SCI – 6720887397 (2018/04)