Program Menu; Auto Program; Manual Program - Sony KF-E50A10 Operating Instructions Manual

Program menu

Program

Auto Program

Manual Program

1 Digit Direct Off
Program Label
Program Block
S e l e c t : Ent e r :
Auto Program
TV
Tunes in all the available channels.
Usually you do not need to perform this operation because the channels are already tuned in
when the TV is first installed (page 16). However, this option allows you to repeat the
process (e.g., to retune the TV after moving house, or to search for new channels that have
been launched by broadcasters).
Follow the operation of "6: Auto-programming the TV" (page 16).
When all available channels have been tuned in, the TV returns to normal operation.
Manual Program
Allows you to preset, adjust, skip, and tune in channels manually.
Press M/m to select one of the following options, then press
Option
Program
TV System
Fine
End: WEGA GATE
TV
Description
Presets channels manually.
1
2
3
4
5
Fine-tunes the selected program number manually if you feel that a
slight tuning adjustment will improve the picture quality.
(Normally, fine tuning is performed automatically.)
Press M/m to adjust the fine tuning, then press
To restore automatic fine tuning, select "Auto".
You can select the options listed below on the Program menu.
To select options
1
Press .
2
Press M/m to select
3
Press M/m to select
4
Press M/m to highlight the option, then press
TV
indicates the available options for TV.
Video
indicates the available options for video input.
PC
indicates the available options for PC input.
Press M/m to select "Program", then press
Press M/m to select the program number you want to
manually tune in, then press <.
Press M/m to select "TV System", then press
Press M/m to select the best received TV broadcast
systems, then press <.
Repeat the procedure above to preset other channels manually.
Press .
, then press .
, then press .
.
.
.
.
Continued
35
.
GB