2. Open the keyless chuck.
3. Insert the accessory tool into the chuck or remove it from the chuck.
4. Tighten the keyless chuck.
5. Check that the accessory tool is held securely.
5.11
Drilling
CAUTION
Risk of injury. The accessory tool may suddenly stall, causing the power tool to rotate about its own axis.
▶ Use the power tool with the side handle fitted and always hold it securely with both hands.
▶ Always grip the side handle at its outermost end.
CAUTION
Risk of injury. Risk of flying fragments.
▶ Wear eye protection.
▶ Set the torque and operating mode selector ring to the "Drilling" symbol
5.12
Hammer-action drilling
SF 6H-A22
▶ Set the selector ring to the "Hammer-action drilling" position
12
English
Printed: 11.12.2018 | Doc-Nr: PUB / 5467444 / 000 / 00
.
.