Introduction; Copyrights; Functions Added In Version 2.0; Installing L-20 Control - Zoom LiveTrak L-20 Control Operation Manual

Introduction

L-20 Control is a remote control application specifically designed for the ZOOM
LiveTrak and
and other functions, this app allows you to operate an
iPad.This manual does not explain the operation of
selves.See the Operation Manual for detailed information about all its functions.

Copyrights

iPad is a trademark of Apple Inc., registered in the U.S. and other countries. iOS
is a trademark or registered trademark of Cisco in the U.S. and other countries
and is used under license. App Store is a service mark of Apple Inc.
®
The Bluetooth word mark and logo are registered trademarks of Bluetooth
SIG, Inc. and these marks are used under license by Zoom Corporation. Other
trademarks and trade names are the property of their respective companies.
All trademarks and registered trademarks in this document are for identifica-
tion purposes only and are not intended to infringe on the copyrights of their
respective owners.

Functions added in Version 2.0

The following function have been added in L-20 Control Version 2.0.
• Multiple iPads can be used to control an
This allows individual performers using different iPads to adjust their own
monitor mixes.

Installing L-20 Control

1.
Open the App Store on the iPad and search for "L-20 Control" .
2.
Tap "GET" on the L-20 Control screen.
This will install L-20 Control on the device.
NOTE
· When you launch L-20 Control, you must pair it with the
→ "Pairing (connecting) with the
. With control of recording, playback, mixer adjustments
3
and
.
or
" on page 4).
or from an
mixers them-
that it will operate (