Download  Print this page

Advertisement

Do not touch the inside of the lamp compartment.
The lamp is very hot immediately after use. Never touch the glass
portion of the lamp or the surrounding parts.
After the used lamp has cooled, place it into the empty box of the
replacement lamp. Never put the used lamp into a plastic bag.
7
Put the new lamp into its place.
Insert the new lamp by pressing the two parts firmly into place as shown
in the illustration. Make sure the lamp is securely mounted into the
compartment. Failure to do so may cause a fire or the screen to go dark.
The lamp compartment is tilted, as shown in the following
illustration.
If the lamp is not securely reattached, the self-diagnostic function
may be triggered and the POWER LED blinks three times (see
page 31).
8
Reattach the lamp door.
Replace the door by inserting the two tabs in the slot from the left side.
Slide the lever to the right and then turn the screw clockwise to secure
the door.
Other Information
(Continued)
53

Advertisement

Table of Contents

   Related Manuals for Sony KDS-50A2020

Comments to this Manuals

Symbols: 0
Latest comments: