Connecting An Av Receiver - Sony GRAND WEGA KF 60DX100 Operating Instructions Manual

Installing and Connecting the LCD Projection TV

Connecting an AV Receiver

Rear of LCD projection TV
VIDEO
40
For greater control of all audio and video equipment, connect an AV receiver.
Change "Video Label" for the VIDEO 1 input to "Receiver" (see page 68).
Disconnect all power sources before making any connections.
1
Connect the coaxial cable from the incoming cable connection or
antenna to IN on the VCR.
2
Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the
LCD projection TV.
3
Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the LCD
projection TV to MONITOR OUT on the AV receiver.
4
Using an AUDIO/VIDEO cable, connect TV OUT on the LCD
projection TV to AUDIO/VIDEO 2 IN on the AV receiver.
5
Using an AUDIO/VIDEO cable, connect the video equipment to the AV
receiver.
6
Select the Setup menu and set "Video Label" to "Receiver" to fix your
LCD projection TV's input to AV receiver (see "Video Label" on page
68).
AUDIO-L
VIDEO
AUDIO-R
VMC-810S/820S (not supplied)
VMC-10HG (not supplied)
Coaxial cable (not supplied)
VMC-810S/820S
(not supplied)
AUDIO/
VIDEO 2 IN
MONITOR
OUT
AV receiver
VMC-810S/820S
(not supplied)
VCR
Cable/
Antenna
AUDIO/
VIDEO 1 IN
AUDIO/VIDEO 1 OUT