Sony GRAND WEGA KF 60DX100 Operating Instructions Manual page 83

Problem
Dotted lines
or stripes
LCD projection TV is fixed to
one channel
Double images, ghosts, or
merged colors
Cannot operate menu
Cannot receive any channels
when using cable TV
Cannot gain enough volume
when using a cable box
Channel Index does not display
all available channels
Cannot receive channels
Unable to select a channel
Lost password
Cannot change channels with
the remote control
Cannot cycle through the other
video equipment connected to
the LCD projection TV
There is a black box on the
screen
Possible Remedies
Adjust the antenna.
Move the LCD projection TV away from noise sources such as cars, neon signs, or
hair-dryers.
Use Auto Program in the Channel menu to add receivable channels that are not
presently in TV memory (see page 63).
Check your Channel Fix settings (see page 63).
Use a highly directional outdoor antenna or a cable (when the problem is caused by
reflections from nearby mountains or tall buildings).
Set the Image Revision to an appropriate value. The default setting is Auto. If
ghosts, doubled images, or merged colors appear with Auto, select the best value
from 0 to 3 (see page 68).
If the item you want to choose appears in gray, you cannot select it.
Turn the LCD projection TV's power off and on again.
Use Auto Program in the Channel menu to add receivable channels that are not
presently in TV memory (see page 63).
Check your cable settings.
Make sure Cable is set to ON in the Channel menu (see page 62).
Increase the volume of the cable box using the cable box's remote control. Then
press TV (FUNCTION) and adjust the LCD projection TV's volume.
Make sure Cable is set to ON in the Channel menu (see "Cable" on page 62).
Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 63).
Use Auto Program in the Channel menu to add receivable TV channels that are
not presently in TV memory (see page 63).
In the password screen (see page 69), enter the following master password: 4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
Be sure you have not inadvertently switched your LCD projection TV from
channel 3 or 4 setting if you are using another device to change channels.
If you are using another device to control channels, be sure the "function" button
for that device has been pressed, or the slide switch is set correctly. For example, if
you are using your cable to control channels, be sure to press SAT/CABLE.
Be sure the Video Label feature has not been set to Skip (see page 68).
You have selected a text option in the Setup menu and no text is available. (see
page 67 to reset Setup selections) To turn this feature off, select OFF in the
Caption Vision option. If you were trying to get closed captioning, select CC1
instead of Text 1-4.
Other Information
(Continued)
83