Carpet Cleaning - Bissell 7901 SERIES User Manual

Carpet Cleaning

Plug into a proper outlet and turn the Power and the
1.
SmartTemp switches ON. Wait two minutes for the
heater to warm up before beginning to clean.
While pressing the trigger, make one slow forward wet
2.
pass and another one back. Let the SmartTemp heated
formula and DirtLifter Powerbrush do the work for you.
Caution: Do not overwet.
Note: Take care not to run over loose objects or
edges of area rugs. Stalling brush may
result in premature belt failure.
Release the trigger and make one slow forward and back
3.
pass over the same area to remove any residual dirty water.
Repeat cleaning passes until solution being pulled up
4.
appears clean.
Continue passes without pressing the trigger until you
5.
can't see any more water being pulled up.
Note: Both the SmartMix and the clean water
tank must have liquid in them in order for
the machine to spray. If one tank is empty
the machine will not apply either cleaning
solution or water only.
When the cleaning job is complete refer to the
6.
Maintenance section for machine cleanup and storage
instructions on page 17-19.
ATTENTION
BERBER CARPET
OWNERS:
Some Berber Carpets have a
tendency to fuzz with wear.
Repeated strokes in the
same area with an ordinary
vacuum or deep cleaner may
aggravate this condition.
Please see Stain Removal
instructions on page 12.
11