Table of Contents
Advertisement
Overview
Overview of Remote Control Buttons
Muting the Sound:
Press to mute TV sound.
Press again to restore the sound.
Selecting TV mode:
Press to switch off PAP,
Multi PIP, Teletext or video input.
Displaying the time:
Press to switch the time
display on or off (available only when teletext is
broadcast).
Displaying On Screen Information:
to display all on-screen indications. Press again to
cancel.
Media Selector:
With this remote control you can operate not
only this TV but also the main functions of
your VCR or DVD.
Switch on the device you want to operate and next
press this button repeatedly to select the VCR, TV
or DVD. A green light will be momentarily lit to
indicate the chosen function.
Before the first time you want to control
a DVD or VCR by using this remote
control, you have to set it up depending on the
brand of the device to be used. For more details,
refer to chapter "Remote Control Configuration
for VCR or DVD" on page 33.
a) PAP (Picture And Picture):
For more details, please refer to the section
"Using PAP (Picture And Picture)".
b) Teletext:
Buttons with green symbols are also used for
teletext operation. For more details, please
refer to the section "Teletext" of this manual.
NexTView:
For more details, please refer to the section
"NexTView" of this manual.
Joystick:
a) If Media Selector is switched to TV:
•When MENU is switched on, use these
buttons to operate the menu system. For
details refer to "Introducing and Using
the Menu System" on page 11.
• When MENU is switched off, press OK to
show an overview of all TV channels. Then
press
or
to select the channel and
then press
button to watch the selected
channel.
b) If Media Selector is switched
to VCR or DVD:
Using these buttons you can control
the main functions of your VCR or DVD.
Fastext:
These buttons are also used for
Fastext operation. For more details please refer
to the "Fastext" chapter in the "Teletext"
section of this manual.
Selecting Sound effect:
repeatedly to change the sound effect.
6
Overview
To Temporarily Switch Off:
Press to temporarily switch off TV (the standby indicator
up in red). Press again to switch on TV from standby mode.
Press
Press this button
Adjusting TV Volume:
this button to adjust the volume
of the TV.
After 15-30 minutes without a signal and without any button being pressed,
the TV set switches automatically into standby mode.
VCR DVD on/off:
your VCR or DVD on or off.
Selecting Input source:
repeatedly until the input of the desired source
appears on the TV screen.
Selecting channels:
If Media Selector is switched to TV or VCR, press
this button to select channels.
For double-digit programme numbers, enter the
second digit within 2.5 seconds.
a) If Media Selector is switched to TV:
Press this button to watch the last channel
selected (the last channel watched for at least 5
seconds).
b) If Media Selector is switched to VCR:
To select a double-digit programme on a Sony
VCR, e.g. 23, press -/- - first and then the
buttons 2 and 3.
a) Recording button:
If Media Selector is switched to VCR, press this
button to record programmes.
b) Resetting to factory set levels:
Press, for a minimum of 3 seconds, to return the
picture and sound settings to the factory default
levels. This will also return the set to the install
condition and the "Auto Tuning" menu will
appear on the screen. If this is the case refer to the
section "Switching on the TV set and
automatically Tuning" (step 4) of this manual.
Freezing the picture:
freeze the picture. Press again to return to the
normal picture.
Selecting Screen format:
repeteadly to change the format of the screen (for
more details, please refer to the section "Changing
the Screen format") of this manual.
Displaying Multi PIP (Picture In Picture):
Press to display Multi PIP mode. Press again to
cancel. For more details, please refer to the section
"UsingMulti PIP (Picture In Picture)".
a) Selecting channels:
select the number of the next or previous
broadcast channel.
b) Teletext:
teletext operation. For more detail please refer to
the section "Teletext" of this manual.
Displaying the menu system:
button to display the menu on the screen. Press
again to remove the menu display from the screen.
Selecting Picture mode:
repeatedly to change the picture mode.
Press
on the TV set lights
Press this button to switch
Press this button
Press this button to
Press this button
Press this button to
These buttons are also used for
Press this
Press this button
Advertisement
Table of Contents
