Selecting Whether The Operation And Error Tones Sound - Sony UP-51MDP Instructions For Use Manual

Setting Up the Printer (Continued)
Selecting Whether the Operation and Error Tones
Sound
112
Installation and Adjustment
Whenever you press a button on the front panel or sub panel, the operation tone
sounds (one time). When an error occurs, the alarm tone sounds (three times). You
can turn these tones on and off using the menu.
1
Display the SYSTEM SETUP menu.
To display the SYSTEM SETUP menu, see steps 1 to 3 in "Adjusting the
Brightness of the Printer Window Display" on page 110.
2
Select BEEP by pressing the F or f button.
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 48 / 9600
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
Position the cursor at BEEP by
pressing the F or f button.
3
Select whether the operation and error tones sound by pressing the G or g
button.
When you want to
Sound the tones.
Disable the tones.
2,4
5
4
3
B E E P
Display BEEP by pressing
S
the F or f button.
Selection
ON
OFF
:
OF F / o n