Sony UP-51MDP Instructions For Use Manual page 100

Setting Up the Printer (Continued)
100
Installation and Adjustment
5
Decide the position of the source image to be used for adjusting the color
balance.
To decide the position of the source image, move the highlighted area by
pressing the F, f, G or g button while holding down the DISPLAY button on
the sub panel.
Move the highlighted part
to the desired image
position by pressing the
F, f, G or g button while
holding down the
DISPLAY button. (The
COLOR BALANCE menu
disappears temporarily.)
6
Press the CAPTURE button.
The image captured in memory appears.
COLOR BALANCE COLOR : 200
PRN SETUP : PRESS [ > ]
A B C
B A L X : 50 [1 – 50 – 99]
B A L Y : 50 [1 – 50 – 99]
X Y Z
B A L STEP : 05 [1 – 20]
TEST PRINT : PRESS [EXEC]
Q1 A 1
7
Select TEST PRINT by pressing the F or f button.
COLOR BALANCE COLOR : 200
PRN SETUP : PRESS [ > ]
A B C
BAL X : 50 [1 – 50 – 99]
BAL Y : 50 [1 – 50 – 99]
X Y Z
BAL STEP : 05 [1 – 20]
TEST PRINT : PRESS [EXEC]
Q1 A 1
Position the cursor at TEST PRINT by
pressing the F or f button.
A B C
X Y Z
Q1 A 1
S
T E S T PR I N T :
Press the F or f button until TEST
S
PRINT appears.
S
[ E C ]
PRE S S XE