Selecting The Lamination Pattern - Sony UP-51MDP Instructions For Use Manual

Setting Up the Printer (Continued)

Selecting the Lamination Pattern

114
Installation and Adjustment
3
Select the desired baud rate by pressing the G or g button.
Baud rate (bps)
Baud rate displayed on the menu. (The display changes from
first two digit indication to four digit indication.)
1200
12 t 1200
2400
24 t 2400
4800
48 t 4800
9600
96 t 9600
SYSTEM SETUP COLOR : 200
PRN SETUP : PRESS [ > ]
LCD - CONTR : 7
BAUDRATE : / 24 / 48 / 9600
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
USER NAME : PRESS [ > ]
Q1 A 1
Switch the desired baud rate to green by
pressing the G or g button. The selected
baud rate is displayed in four digits.
4
Select PRN SETUP by pressing the F or f button, then press the g button.
The adjusted values are stored. The PRINTER SETUP menu appears.
5
Press the MENU button.
The regular screen appears.
Using the UPC-540 Self-Laminating Color Printing Pack ensures that the printout
is well preserved.
You can select the lamination pattern according to the finish you want to have on
the printout.
B AUDRA T E
S
1,4 2
3
:
1 2 / 2 4 / 4 8 / 9 6 0 0
Display the desired baud
rate in four digits by
pressing the G or g button.