Sharp MX-B400P Operation Manual page 140

4
(2)
(1)
5
6
All files that match the current search conditions can be deleted by selecting the [Delete the Data] key.
BACK OK
BACK OK
BACK OK
BACK OK
If a password has been established,
select the [Password] key.
Enter the password with the soft numeric keypad (5 to 8 digits)
and select the [OK] key. For the procedure for entering
numbers, see "Entering
USING THE MACHINE". Only files that have the same
password will be selected.
If you do not wish to enter a password, go to the next step.
To change the number of copies,
configure the settings.
If you wish to use the number of copies stored with each file, go
to step 6.
(1) Select the [Apply the Number from Stored
Setting of Each Job] checkbox so that it is
not selected (
(2) Set the number of copies.
Select the number with the
keys to move the frame to the next place.
After entering the number, press the [OK] key.
☞
"Entering numbers" (page 1-9) in "1. BEFORE
USING THE MACHINE".
Select the [Print and Delete] key or the
[Print and Save] key.
• If the [Print and Delete] key is selected, the files will be
automatically deleted after printing.
• If the [Print and Save] key is selected, the files will be saved
after printing.
2-61
PRINTING
numbers" (page 1-9) in "1. BEFORE
).
keys and use the