Display Contrast; Total Count; Job Count; Device Count - Sharp MX-B400P Operation Manual

Display Contrast

Use this to set the contrast of the machine's display. Select the [Display Contrast] key.
In the screen that appears, select the [Lighter] key or the [Darker] key to adjust the contrast.

Total Count

This function shows the page count in each mode. Select the [Total Count] key.

Job Count

This displays or prints out the counts of all jobs.
• Each sheet of paper used for automatic two-sided printing is counted as two pages.
• Pages printed directly from the machine such as list prints are included in the "Other Prints" count.
• The items displayed (or printed) will vary depending on the machine specifications and peripheral devices installed.

Device Count

This is used to display or print the counts of the peripheral devices installed on the machine.
The items displayed (or printed) will vary depending on the machine specifications and peripheral devices installed.
3-10
SYSTEM SETTINGS
OPERATION PANEL (GENERAL)