Updating System Software; I A G N O S T I C S And Esting - Bosch ACS 561 Repair Instructions

ACS 561 Service Manual
Download Current Software
Equipment Requirements:
(1) SD Card Reader/Programmer
(1) SD Card
These items may be purchased from an office
supply or retail store carrying computer elec-
tronics accessories.
Perform the following:
1. Connect the SD card reader/programmer
to your computer and insert the SD card.
2. Cancel any residual SD card content.
3. Download the current software from EDIS.
4. Unpack the software pack onto the SD card.
Robert Bosch GmbH

UPDATING SYSTEM SOFTWARE

Diagnostics and Testing
Install Current Software
The following instructions outline the basic
steps to complete this procedure.
1. Connect the unit to its power source. Verify
the power switch is OFF.
2. Insert the SD card into the unit SD card slot.
3. Turn the unit ON.
4. Follow prompts to install from the menu ap-
pearing when updating software.
5. Allow the unit to install the software com-
pletely and then remove the SD card.
19
SP00D00517 2018-07-11