Better Homes and Gardens BH17-084-098-48 Manual page 15

A
N
15. Now, go back and securely tighten all the Cam Locks and Wood Screws. Make sure all the parts are
tight and there are no gaps between the parts. This will help keep the unit square.
16. Unfold the Back Panels (N and O) and lay them to the back of the assembled unit. Make sure the
margins along all edges of Back Panels are equal. Screw the 15 mm Washer Head Screws (6) into the
pre-drilled small holes on the Back Panels (N and O).
NOTE: We recommend attaching back panels with the screws at the corners first.
Assembly Instructions
N
C
D
O
M3.5 x 15 mm Washer Head
(34 used in this step)
15
O
F
Screw
⑥
6