Specifications; Ordering Information - Honeywell M6410A Product Data

M6410A, M7410F ACTUATORS; V5862A, V5863A VALVES

SPECIFICATIONS

IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
an individual unit may not exactly match the listed
specifications. Also, this product is tested and
calibrated under closely controlled conditions and
some minor differences in performance can be
expected if those conditions are changed.
Models:
M6410A: Non-Spring Return Valve Actuator. Provides floating
control of the V5862A and V5863A Valves.
M7410F: Non-Spring Return Valve Actuator. Provides
modulating control of V5862A and V5863A Valves.
V5862A: Two-way NPT Valves.
V5863A: Three-way NPT Mixing Valves.
CAUTION
Equipment Damage Hazard.
Installing a high-force (67.5 lb [300 N]) actuator on
1/2 or 3/4 in. valve can damage the valve beyond
repair.
Use only Series 1000 (40.5 lb [180 N]) actuators with
the smaller (1/2 in. and 3/4 in.) valves.
IMPORTANT
— A low-force (40.5 lb [180 N]) actuator installed on a
valve larger than 3/4 in. cannot operate the valve.
— Install high-force actuators (67.5 lb) only on large
valves (1 in., 1-1/4 in., 1-1/2 in.).
Dimensions:
Valves: See Fig. 1.
Actuators: See Fig. 2.
Control Modes:
M6410A: Floating.
M7410F: Modulating.
Ambient Ratings:
Operating Temperature Range: 32° to 122°F (0° to 50°C).
Storage Temperature Range: -40° to 158°F (-40° to 70°C).
Humidity Range: 5 to 95% RH (noncondensing).

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
63-2612—05
Electrical Ratings:
Input Power: 24 Vac, +10/-30 percent, 50/60 Hz.
Power Consumption:
M6410A: 0.7 VA.
M7410F: 1.4 VA.
Input Signal (M7410F): Modulating (adjustable) 0 to 10V,
2 to 10V, 0.1 mA.
Input Impedance (M7410F): 100K ohms.
Mounting: Actuator screws onto valve body.
Connections: 4.9 ft (1.5m) cable.
Weight:
M6410A: 5 oz (0.15 kg).
M7410F: 5.6 oz (0.16 kg).
Stroke: 1/4 in. (6.5 mm).
Running Time:
At 50 Hz: 150 seconds.
At 60 Hz: 125 seconds.
Stem Force: 67.5 lb (300 N).
Suitable Medium: Water with maximum 50% glycol.
Controlled Water Temperature: 36° to 230°F (2° to 110°C).
Rangeability:
Two-way Valve: 50:1.
Three-way Valve: 50:1 for controlled port (A to AB).
Flow Characteristic: Linear.
Valve Cv Rating: See Table 1.
NOTE: To determine the capacity index (Cv) needed for
your application, use the following formula: Cv =
gallons per minute divided by the square root of
the pressure drop across the valve when the
valve is fully open.
Body Material: Brass.
Stem and Plug Assembly:
Stem: Stainless steel.
Plug: Brass.
2