Chapter 8: Wireless Compliance
RF STATEMENT
Medical Electrical Equipment needs special precautions regarding Electromagnetic Compatibility (EMC) and needs to be
installed and put into service according to the EMC information provided in the following section.
Interference may occur in the vicinity of equipment marked with the following symbol,
Portable and mobile RF communication equipment (e.g. cell phones) can affect Medical Electrical Equipment. The
use of accessories and cables other than those specified may result in increased emissions or decreased immunity.
The device is suitable for use in all establishments, including domestic establishments and those directly connected
to the public low voltage power supply network that supplies buildings used for domestic purposes.
Portable and mobile RF communications equipment should be used no closer to any part of the device, including
cables, than the recommended separation distance calculated from the equation applicable to the frequency of
the transmitter.
The device is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. Any other accessories, transducers and cables may result in increased emissions or decreased immunity
and EMC performance.
The device should not be used adjacent to or stacked with other equipment and if adjacent or stacked use is
necessary, it should be observed in order to verify normal operation in the configuration in which it will be used.
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into
service according to the EMC information provided in this manual.
NOTE: VivaQuant is not responsible for any changes or modifications made to the device or
charger. Such modifications could void the user's warranty and authority to operate the
equipment and may create a safety hazard.
29
.