Advertisement
To be able to use the pipe cleaning device, the white plastic sleeve must be inserted
correctly. Please check the seat of the sleeve before each use. (2 on the illustration)
Make sure that the lever is in position 4 a and push the spiral through the device until
the drill comes out of the device at the front.
The spiral must be cautiously guided manually until it is clogged in the pipe. The han-
dle must be in rest position. Figure 4 Position a. In this position, the spiral does not
rotate and thus allows the spiral to be moved back and forth within the tube. Use to
work the spiral work
© by WilTec Wildanger Technik GmbH
Seite 19
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Version 7. 2017
Advertisement
