Advertisement
Technical specifications
Voltage
Piece capacity
Max. Length
Ø Spring
Rotational speed
Weight fo machine
Working weight
Input / output power
Delivery
- Pipe cleaning machine
- guide hose (6 parts - total 13.8m)
- Drilling and cutting heads
- gloves
- Assembly Tool
- Manual
commissioning
Plug the plug of the pipe cleaner into a suitable socket. Make sure that the switch is
in the "OFF" position. (1 on the figure)
To loosen the clog, use only the small diameter drill and first drill the clogging. If the
clogging is open and the water drains slowly, use the largest adapted drill to com-
pletely drill the clogging. If the blockage is cleansed, a thorough rinse is recom-
mended. If present, the pipe wall should be cleaned with a chain spinning drill with
running water.
Depending on the clogging, different tools can be attached to the spiral. Select a suit-
able attachment and attach it to the spiral. Make sure that the attachment is securely
engaged in the holder. The attachment can only be removed with the help of a
screwdriver.
The attachment may only be changed if the spiral is not in the device. To release the
spiral, the lateral lever must be in position 4 a (top). You can now simply pull the spi-
ral out of the device.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
230V, 50Hz
Ø 32 – 100 mm
14 m
Ø 16 mm
400 revolutions per minute
22 kg
12 kg
390W/250W
Version 7. 2017
Seite 18
Advertisement
