Advertisement
Quick Links
Operation Manual
Drain Cleaner
ARTIKEL 51451
Model simular, changes are possible and depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 13
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Version 7. 2017
Advertisement
Related Manuals for WilTec 51451
Summary of Contents for WilTec 51451
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 13 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 2 Technik GmbH assumes no liability for any errors in this user manual or the connec- tion diagram. Although Wiltec Wildanger Technik GmbH has made every effort to make sure that this user manual is complete, accurate and updated, errors cannot always be avoided.
- Page 3 This appliance is not intended to be used by persons (or even children) with reduced physical, sensory or mental abilities, or persons who do not have the © by WilTec Wildanger Technik GmbH Seite 15 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 4 When using the glove, it is important to ensure that a latex disposable glove is worn under the glove for hygienic reasons. (Do not reuse damaged latex gloves.) Wear rubber boots (insulation) during cleaning work. © by WilTec Wildanger Technik GmbH Seite 16 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de Version 7. 2017...
- Page 5 Check the extension cables regularly and replace them if they are dam- aged. Keep handles dry, clean and free of grease and oil. © by WilTec Wildanger Technik GmbH Seite 17 http://www.WilTec.de http://www.aoyue.eu...
- Page 6 The attachment may only be changed if the spiral is not in the device. To release the spiral, the lateral lever must be in position 4 a (top). You can now simply pull the spi- ral out of the device. © by WilTec Wildanger Technik GmbH Seite 18 http://www.WilTec.de http://www.aoyue.eu...
- Page 7 Figure 4 Position a. In this position, the spiral does not rotate and thus allows the spiral to be moved back and forth within the tube. Use to work the spiral work © by WilTec Wildanger Technik GmbH Seite 19 http://www.WilTec.de http://www.aoyue.eu...
- Page 8 To insert or remove the spiral A into the device, the switch (B) must be in the OFF position and the side lever must be upwards - as shown in the figure. Never change the tool while the spiral is in the machine © by WilTec Wildanger Technik GmbH Seite 20 http://www.WilTec.de http://www.aoyue.eu...
-
Page 9: Disposal Regulations
EU) were implemented in the law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.