Advertisement
Quick Links
Operation Manual
Drain Cleaner
51451
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 51451
Summary of Contents for WilTec 51451
- Page 1 Operation Manual Drain Cleaner 51451 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 • Children should be supervised to ensure that they do not play with the device. © by WilTec Wildanger Technik GmbH Item 51451 Page 3 http://www.WilTec.de...
- Page 4 (if the working arc is too large); then, there is a risk of clipping; • the spiral can be sputtered out of the pipe. Risk of injury! © by WilTec Wildanger Technik GmbH Item 51451 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 Scope of delivery • Pipe cleaning machine • Guide hose (6 parts, total 13.8 m) • Drilling and cutting heads • Gloves • Assembly tool • Manual © by WilTec Wildanger Technik GmbH Item 51451 Page 5 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de...
- Page 6 Please check the seat of the sleeve before each use (2). Make sure that the lever is in pos. 4a, and push the spiral through the device until the drill comes out of the device at the front. Commissioning © by WilTec Wildanger Technik GmbH Item 51451 Page 6 http://www.WilTec.de...
- Page 7 To insert or remove the spiral A into the device, the switch B must be in the “OFF” position, and the side lever must be upwards, as shown in the figure. • Never change the tool while the spiral is in the machine © by WilTec Wildanger Technik GmbH Item 51451 Page 7 http://www.WilTec.de http://www.aoyue.eu...
- Page 8 This logo indicates that this electric equipment must not be disposed with the domestic waste. The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE- registration number DE45283704. Disposal of used electrical and electronic appliances...