Page 2
The manufacturer, Systemair, stress the point of his request, that the product must be installed by a qualified person. Always remember that wrong installation might cause important...
Page 3
Mistakes in the installation or use of the product, will be considered as not compliance of the indications of the manufacturer, and therefore Systemair will not accept any claim or responsibility for this. INSTALLATION AND MOUNTING INSTRUCTIONS The maximum R.P.M indicated on the technical label of the product must never be exceeded.
Page 4
All products equipped with electric and moving rotors with IP protection degree (CEI Standard) must be kept out of people reaching, and in case of need protected by the necessary elements. Systemair manufactures a wide range of components for protection. Please consult our catalogue.
Page 5
GENERAL RULES REGARDING THE ELECTRIC SUPPLY TO THE PRODUCT According to the safety rules, products using electricity must be connected to an efficient ground electric gateaway. In case of doubt ask for a deep electric installation check and be sure that it is carried out by a qualified person.
Page 6
Approx. weight without min./max. motor Size output in kg 10/10 12/12 15/15 18/18 20/20 22/22 25/25 30/28...
Need help?
Do you have a question about the KPB Series and is the answer not in the manual?
Questions and answers