Siemens Sinamics S120 Getting Started page 52

Commissioning a drive
2. Click on button "Assume control priority!".
The "Assume control priority" window opens.
Figure 7-5
3. Click on button "Safety notes".
The "Safety notes" window opens.
Figure 7-6
4. Read and take note of the safety notes and then close the window.
5. In the "Assume control priority" window, click on button "Accept".
The window is closed and the control panel is activated.
Figure 7-7
52
Assuming control priority
Safety instructions
Control panel motor enable signal
Getting Started with STARTER
Getting Started, 11/2017, 6SL3097-4AG00-0BP5