Asus WL-520G Quick Start Manual page 11

 Select Connect to an existing wireless
L A N ( S t a t i o n ) w h e n t h e w e l c o m e
window appears, then click Next.

ASUS ONE TOUCH WIZARD searches
and displays all the available stations as
shown in the picture. Select WL520g and
press Next to continue.

T h e s e t u p w i z a r d t h e n a s k s f o r
encryption setup. Set Key Length as 4
bits (10digits) as we have previously
set on WL-520g, then select Automatic
Generation and input  into the
Passphrase box.
Note: The encryption mode on your
client must be the same with that on your
wireless router.

Wait for several seconds to get the client
connected to the wireless router. Then
a screen informing the result of the
connection would appear. Press Next to
continue.
Then you will see the IP configuration
0
screen. Setup the client IP address
according to your network condition. After
the setup is completed, Click Finish.
WL-520g Quick Start Guide