Electrical Safety - Craftsman CMXEQWX3232 Instruction Manual

WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN
OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT.
!
WARNING:
drilling, and other construction activities may contain chemicals that are
known to cause cancer, birth defects, or other genetic abnormalities. These
chemicals include:
The level of risk from exposure to these chemicals varies, according to how
often this type of work is performed. In order to reduce exposure to these
chemicals, work in a well-ventilated area, and use approved safety
equipment, such as a dust mask that is specifically designed to filter out
microscopic particles.

ELECTRICAL SAFETY

WARNING:
tool, use proper circuit protection.
This tool is wired at the factory for 120 V AC operation. It must be
connected to a 120 V AC, 15 A circuit that is protected by a time-delayed
fuse or circuit breaker. To avoid shock or fire, replace power cord
immediately if it is worn, cut or damaged in any way.
GENERAL SAFETY WARNINGS
Dust that is created by power sanding, sawing, grinding,
Lead from lead-based paints
Crystalline silica from bricks, cement, and other masonry
products
Arsenic and chromium from chemically treated lumber
To avoid electrical hazards, fire hazards or damage to the
SAVE THESE INSTRUCTIONS FOR REFERENCE
5