Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Craftsman CMXEQWX3232
Summary of Contents for Craftsman CMXEQWX3232
- Page 1 INSTRUCTION MANUAL | GUIDE D’UTILISATION | MANUAL DE INSTRUCTIONES 4” RESTORER 4” RESTAURADOR PONCEUSE 4” CMXEQWX3232 IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US. POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER. SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS. 1-888-331-4569 WWW.CRAFTSMAN.COM...
-
Page 2: Table Of Contents
TABLE OF CONTENTS DEFINITONS: SAFETY ALERT SYMBOLS AND WORDS GENERAL SAFETY WARNINGS EYE, EAR & LUNG PROTECTION ELECTRICAL SAFETY POWER TOOL SAFETY GENERAL SAFETY RULES WORK AREA ELECTRICAL SAFETY PERSONAL SAFETY POWERS TOOL USE AND CARE SERVICE SPECIFIC SAFETY RULES GUIDELINES FOR EXTENSION CORDS SYMBOLS ASSEMBLY AND OPERATING... -
Page 3: Definitons: Safety Alert Symbols And Words
Roller end cover hasp WARNING: To reduce the risk of injury, read the Roller end cover clamp If you have any questions or comments about this or Roller end cover any product, call CRAFTSMAN toll free at: Roller 1-888-331-4569. Air vents handle... -
Page 4: General Safety Warnings
GENERAL SAFETY WARNINGS WARNING: Before using this tool or any of its accessories, read this manual and follow all Safety Rules and Operating Instructions. The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible situations. It must be understood that common sense and caution are factors which cannot be built into the product. -
Page 5: Electrical Safety
GENERAL SAFETY WARNINGS WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN OPERATING A POWER TOOL IN A DUSTY ENVIRONMENT. WARNING: Dust that is created by power sanding, sawing, grinding, drilling, and other construction activities may contain chemicals that are known to cause cancer, birth defects, or other genetic abnormalities. -
Page 6: Power Tool Safety
POWER TOOL SAFETY WARNING: When operating a power tool outdoors, use Read all safety an extension cord suitable for outdoor use. warnings and instructions. Failure to Use of a cord suitable for outdoor use reduces follow the warnings and instructions may result the risk of electric shock. -
Page 7: Powers Tool Use And Care
POWER TOOL SAFETY Personal safety Use the power tool, accessories and tool bits etc. in accordance with these instructions, If devices are provided for the connection of taking into account the working conditions and the work to be performed. Use of the dust extraction and collection facilities, power tool for operations different from those ensure these are connected and properly... -
Page 8: Specific Safety Rules
SPECIFIC SAFETY RULES Do not plug in the Restorer WARNING: Always use safety goggles until you have read and understand this and a dust mask when using compressed air Instruction Manual. Learn the tool’s to remove sanding dust from the tool. applications and limitations, as well as the specific potential hazards related to this tool. -
Page 9: Guidelines For Extension Cords
GUIDELINES FOR EXTENSION CORDS Make sure your extension cord is the proper When operating a power tool outdoors, use size. When using an extension cord, be sure to an outdoor extension cord marked “W -A” or “W”. use one heavy enough to carry the current the T hese cords are rated for outdoor use and reduce the risk of electric shock. -
Page 10: Symbols
SYMBOLS WARNING: Some of the following symbols may appear on the Restorer. Study these symbols and learn their meaning. Proper interpretation of these symbols will allow for more efficient and safer operation of this tool. Volts No load speed Amperes Alternating or direct current Hertz... -
Page 11: Assembly And Operating
ASSEMBLY AND OPERATING CHANGING SANDING SLEEVE ON ROLLER WARNING: Remove the plug from the power source before installing or removing a sanding roller. Lift the two roller end cover hasps (1) away from the main housing (2) (Fig. 1). Fig. 3 Slide the roller onto the roller shaft (Fig. -
Page 12: On/Off Trigger Switch
ASSEMBLY AND OPERATING To release the lock-on button to turn the tool OFF, squeeze and then release the trigger. The trigger switch will then turn OFF. Fig. 5 Fig. 7 ON/OFF TRIGGER SWITCH WARNING: Be sure the lock button is not depressed by cycling the ON/OFF switch The ON/OFF trigger switch (1) is a single several times or by depressing and releasing... -
Page 13: Sanding
ASSEMBLY AND OPERATING To begin sanding, install the appropriate SANDING sanding sleeve, set the tool speed and squeeze the trigger switch to turn the tool ON. This tool can be used to sand rough material or NOTE: The sanding sleeve should NOT be in to remove paint, varnish or other finishes. -
Page 14: Cleaning The Tool
ASSEMBLY AND OPERATING SANDING CLEANING THE TOOL Always keep the tool "moving" when the sanding It is important to keep the tool as clean as sleeve is in contact with the workpiece. This is possible to reduce the risk of fire and to produce particularly important when sanding wood or the best possible sanding results. -
Page 15: Maintenance
MAINTENANCE GENERAL It has been found that electric tools are WARNING: subjected to accelerated wear and possible When servicing, use only premature failure when they are used on identical replacement parts. Use of any other fiberglass boats and automotive parts, replacement parts may create a hazard or wallboard, spackling compounds or plaster. -
Page 16: Exploded View
EXPLODED VIEW... -
Page 17: Parts List
PARTS LIST WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the Restorer. WARNING: To assure SAFETY and RELIABILITY of repairs, maintenance and accessories, the use of any accessory not recommended for use with this tool could be hazardous. - Page 18 Terminal block THREE YEAR LIMITED WARRANTY CRAFTSMAN will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.craftsman.com...