6. DIP Switch Setting
6.1 Current Setting
The current setting is in the following table.
Dial switch
Current
RMS
1.0A
1.46A
1.91A
2.37A
2.84A
3.31A
3.76A
4.2A
6.2 Standstill current Setting
SW4 is used for setting the standstill current , "off" means the standstill current is
set to be half of the selected dynamic current or other current. While "on" means
the standstill current is set to be the same as the selected dynamic current.
6.3 Microsteps Setting
The Microsteps setting is in the following table.
Full Digital Stepper Drive DM542S
SW1
on
off
on
off
on
off
on
off
- 9 -
SW2
on
on
off
off
on
on
off
off
SW3
on
on
on
on
off
off
off
off