Veeder-Root EMR4 TLS-450PLUS Installation And Quick Help

INTRODUCTION
This Installation and Quick Help Guide contains the necessary information to connect a wireless modem
to a TLS-300, TLS-350, TLS4, or TLS-450PLUS console and obtain the tank information in the DataLink
program on a PC.
DESCRIPTION:
Kit Number Description
0845900-037 TLS-3XX Consoles Interface Kit
- XTend 900 MHZ
0845900-040 TLS-4XX Consoles Interface Kit
- XTend 900 MHZ
INDIVIDUAL MODEM UNIQUE ADDRESS - IMPORTANT
Each modem has a unique address assigned by Veeder-Root. This number is on the label on
the modem itself, and on the box.
office software. The TLS connected modem number will be entered into the office software in
the TLS modem location on the DataLink configuration page.
TLS CONNECT KIT MODEM:
Veeder - Root
INSTALLATION and QUICK HELP
FOR TLS CONSOLE INTERFACE TO THE
VEEDER-ROOT EMR4 DATALINK
USING AN XTEND 900 MHZ WIRELESS MODEM
577014-353 Rev. A
This number is your traceability from the TLS console to the
General Contents and Comments
This TLS kit includes:
• Wireless modem with standard antenna
Special 9-pin connector for modem
•
• Special 25-pin connector for console
25-foot Ribbon cable for console to modem
•
connection
Power supply for modem
•
This manual
•
This TLS kit includes:
• Wireless modem with standard antenna
9-pin connectors for modem and console
•
25-foot ribbon cable for console to modem
•
connection
Power supply for modem
•
• This manual
Page 1 of 18