Download Print this page
Veeder-Root EMR4 TLS-300 Installation And Quick Help
Veeder-Root EMR4 TLS-300 Installation And Quick Help

Veeder-Root EMR4 TLS-300 Installation And Quick Help

For tls console interface to the datalink using an xtend 900 mhz wireless modem

Advertisement

Quick Links

INTRODUCTION
This Installation and Quick Help Guide contains the necessary information to connect a wireless modem
to a TLS-300, TLS-350, TLS4, or TLS-450PLUS console and obtain the tank information in the DataLink
program on a PC.
DESCRIPTION:
Kit Number
Description
0845900-037
TLS-3XX Consoles Interface Kit
- XTend 900 MHZ
0845900-040
TLS-4XX Consoles Interface Kit
- XTend 900 MHZ
INDIVIDUAL MODEM UNIQUE ADDRESS - IMPORTANT
Each modem has a unique address assigned by Veeder-Root. This number is on the label on
the modem itself, and on the box.
office software. The TLS connected modem number will be entered into the office software in
the TLS modem location on the DataLink configuration page.
TLS CONNECT KIT MODEM:
Veeder - Root
INSTALLATION and QUICK HELP
FOR TLS CONSOLE INTERFACE TO THE
VEEDER-ROOT EMR4 DATALINK
USING AN XTEND 900 MHZ WIRELESS MODEM
577014-353 Rev. A
This number is your traceability from the TLS console to the
General Contents and Comments
This TLS kit includes:
Wireless modem with standard antenna
Special 9-pin connector for modem
Special 25-pin connector for console
25-foot Ribbon cable for console to modem
connection
Power supply for modem
This manual
This TLS kit includes:
Wireless modem with standard antenna
9-pin connectors for modem and console
25-foot ribbon cable for console to modem
connection
Power supply for modem
This manual
Page 1 of 18

Advertisement

loading

Summary of Contents for Veeder-Root EMR4 TLS-300

  • Page 1 This manual INDIVIDUAL MODEM UNIQUE ADDRESS - IMPORTANT Each modem has a unique address assigned by Veeder-Root. This number is on the label on the modem itself, and on the box. This number is your traceability from the TLS console to the office software.
  • Page 2 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A Unique Address Assigned By Veeder-Root XTend 900 MHz, 1 Watt, Serial Example of Label on Side of Modem...
  • Page 3 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A 2. Screw the antenna into the modem and hand tighten. 3. Connect the serial connector to the modem and plug the cable into the connector.
  • Page 4 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A TLS CONSOLE CONNECTION AND SETUP For a TLS-300 console: Use the Direct Connect location and connector shown:...
  • Page 5 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A For a TLS4 Console: Look on the bottom of the console for the 9-pin serial connectors shown.
  • Page 6: Console Setup

    INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A Use the chart below to verify the configuration of the desired TLS-450PLUS serial connector: NOTE: A RS-232 module is required for DataLink.
  • Page 7 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A TLS-300 Console Veeder - Root Page 7 of 18...
  • Page 8 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A TLS-350 Console With CPU Board Veeder - Root Page 8 of 18...
  • Page 9 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A TLS-4XX Consoles From the Home Screen, navigate to Setup>System>Security and ensure Front Panel Security is Disabled: Serial Communications Protocol Setup TLS-3XX Consoles On the console keypad with Date and Time and “All Functions Normal”...
  • Page 10 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A 1. Push MODE button to SETUP MODE 2. Push FUNCTION Button to COMMUNICATIONS SETUP 3. Push STEP button to PORT SETTINGS 4.
  • Page 11 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A  STEP to CODE o If not DISABLED, then push the CHANGE KEY until DISABLED and ENTER.
  • Page 12 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A DATALINK SETUP FOR READNG A TLS CONSOLE Click on Configuration Page>Settings tab page. 1. In the Modem drop down box select ‘MaxStream Wireless Modem’, then click Save.
  • Page 13 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A 2. The Configuration Page>Settings tab page will update and display the TLS Modem field. Also, Tank Page will appear in menu bar. In the TLS Modem field enter the number on the side of the modem connected to the TLS Console, then click Save.
  • Page 14 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A Click on Tank Page Click on tank name to get details Detail of Tank Last time tank was...
  • Page 15: Troubleshooting

    INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A TROUBLESHOOTING After launching DataLink you can verify that the modem is online by following the steps below.
  • Page 16 INSTALLATION and QUICK HELP FOR TLS CONSOLE INTERFACE TO THE VEEDER-ROOT EMR4 DATALINK USING AN XTEND 900 MHZ WIRELESS MODEM 577014-353 Rev. A 4. If you are not communicating you will see this screen: Veeder - Root Page 16 of 18...
  • Page 17: Damage Claims

    XTP9B-PKCUA (or XT09-PKC-UA) user guides and datasheets at https://www.digi.com. Notice Veeder-Root makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Veeder-Root shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this publication.

This manual is also suitable for:

Emr4 tls-350Emr4 tls4Emr4 tls-450plus