Advertisement
Storing The Flip-It
Your Flip-It can be stored Ready-to-Use, by leaving water
and Formula in the unit. Be sure to remove wet Gentle
Clean™ Pad before storing.
Troubleshooting
Water & Formula are draining out from the Clean Tank
Possible Causes
Clean Tank black Cap & Insert are not on tight
1
Clean Tank black Cap & Insert are cross threaded
2
No suction
Possible Causes
Filter may be dirty or clogged
1
Wet Cleaning Nozzle may not be on properly
2
Dirty Tank is full
3
Filter is wet
4
Water is not flowing
Possible Causes
Something is caught and clogging the air path
1
Clean Tank is not inserted properly
2
10
ug603_6719_5200E_305.indd 10
ug603_6719_5200E_305.indd 10
Tip:
If the Pleated Filter is rinsed
with warm water to clean,
it is recommended to leave
it out of the unit to air dry
before placing it back in
the unit.
Remedies
Remove black Cap & Insert
1
and attach tightly
Remove black Cap & Insert
2
and make sure it is
screwed on straight
and tightly
Remedies
Remove Filter from the Dirty
1
Tank and clean
Make sure Wet Cleaning
2
Nozzle is on tight and
snapped into place
Empty Dirty Tank
3
Make sure Filter is
4
completely dry before
placing back into the unit
Remedies
Unplug unit. Remove Wet
1
Cleaning Nozzle and insert
a blunt object into the
air path to remove any
potential clog
Remove Clean Tank and
2
reinsert into the unit
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.
11/16/05 2:58:48 PM
11/16/05 2:58:48 PM
Hide quick links:
Advertisement
