Decal Location - H&S 2112 Operator's Manual

Your Manure Spreader was manufactured with operator safety in mind. Located on the Manure
Spreader are various decals to aid in operation, and warn of danger or caution areas. Pay close attention
to all decals on your Manure Spreader.
DO NOT REMOVE ANY OF THESE DECALS. IF THE DECALS ARE LOST, DAMAGED,
OR IF THE MANURE SPREADER IS REPAINTED, REPLACE THE DECALS.
REMEMBER: DECALS ARE FOR YOUR PROTECTION AND INFORMATION.
Listed below are the decals on your Manure Spreader. These decals may be ordered individually by part
number or by ordering a complete set.
PART # QTY
311 1
1494A 2
1494J 2
1494K 3
1494L 1
3894 2
9194A 1
9194B 1
12794 3
54033 1
66076 3
71201 1
71203 1
71206 1
71209 1
71205 2
71494A 3
72203A 1
82602 1
82793 1
081312 1
093466 1
093020 6
11211176 1
111593A 2
DCRED 1

DECAL LOCATION

DESCRIPTION
Patent Numbers
Warning - Do Not Operate
Warning - Do Not Clean
Warning - Do Not Remove Shields
Danger - Rotating Driveline
Warning - Do Not Operate
Danger - No Step
Danger - Never Allow Riders
Warning - Do Not Remove Shields
Made in the U.S.A.
Grease Zerk Located Behind Shield
H&S Logo Decal LH
H&S Logo Decal RH
H&S Logo Decal Front
2112 Model Decal Front
2112 Model Decal LH & RH Side
Warning - Do Not Operate
Warning - Help Avoid Injury
Warning - Crushing Hazard
Warning - Disengage PTO before Shifting
Grease Zerk Located Behind Sprocket
Maximum Operating Speed - 540 RPM
Grease Zerk
Shear Bolts
Danger - Stay Clear of Beater
Red Reflector
-22-