Compatibility Requirements - GE C-Start Installation Manual

™
Simple DIY Setup
Install
your C-Start Switch

Compatibility Requirements

Rating 120V AC 60Hz
Neutral wire is required (Wire is usually white or grey)
Ground wire is required (Wire is usually green, green with
a yellow stripe, or copper)
Wi-Fi 802.11 b/g/n @ 2.4 GHZ is required
Let's Do It
INCLUDED (PER SWITCH)
Switch Wall Plate
Line Load
Wire Labels
And we're here to help. For in-depth instructional videos and a guided tour
Download
the C by GE app
4 Wire Nuts 4 Phillips
Mounting Screws
Ground Neutral
You Got This!
through the installation, go to cbyge.com/switch-support.
Add
your C-Start Switch
to the C by GE app
Works with compatible LED bulbs, including C by GE smart LED
bulbs. Visit cbyge.com/compatibility
LED up to 150 watts
Incandescent/halogen up to 450 watts
YOU'LL NEED
Phillips Screwdriver
Needle Nose Pliers
(recommended)
Voltage Tester
(recommended)
For Help, Go To: cbyge.com/switch-support or call 1-844-30C-BYGE
12
9 3
6
Approximately
30 minutes of your day
to install and setup
the switch
2