Table 6. Power Source Jumper (P202); Table 7. Developer Board Power Jumper (P201); Table 8. G20 Power Jumper (P201) - Motorola F3030A Developer's Manual

Developer Board and Interfaces Description
3.4.1.4 Power Source Selection
The Developer Board AC adapter and battery power inputs include a selection jumper (P202) that diverts either the regulated
AC adapter power or the battery power to the board.
P202 Jumper
Position
1
•
Jumpers are provided for disconnecting the power from the Developer Board and for disconnecting the power from the g20.
You may wish to remove the Developer Board power jumper and shut off the power to the board in order to diagnose a problem
that may be caused by the board. The g20 will continue to receive power.
You may also want to remove the g20 power jumper and then connect an amperometer to the jumper's two pins to measure the
current through the g20.
16

Table 6. Power Source Jumper (P202)

2 3
•
Adapter
• •
Battery
Adapter and battery disconnected

Table 7. Developer Board Power Jumper (P201)

P201
Jumper
Position
1 2
• •

Table 8. g20 Power Jumper (P201)

P200
Jumper
Position
1 2
• •
Selected Mode
Selected Mode
Developer Board connected to
power source
Developer Board disconnected
from power source
Selected Mode
g20 connected to power
source
g20 disconnected from power
source
Power Source
AC Adapter
LiIon Battery
DC power only
98-08901C67-O