Table of Contents
Advertisement
MicroLite Receiver User Manual
2.4.2 Remote Control via RS-232
An RS-232 command set is implemented to allow remote control of all configuration
options, as well as monitoring of internal status and settings. Commands and responses
are sent via the RS-232 serial interface on the 9-pin connector.
The IMT NanoController GUI is available for controlling the unit via the RS-232 serial
interface. Any Windows compatible computer running Windows XP/Vista/7 with 500
MB of memory and 1 GHz Pentium or above can be used. Refer to Chapter 5,
"Operation" for more information.
2.4.3 Firmware updates
Update unit firmware via the Ethernet interface. Contact IMT Tech Support for
additional details.
Revision 1.1
14
Advertisement
Table of Contents
